What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 29.06.2025 00:44

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
2024–10–14 [Omar Gharbi Omar Gharbi ]
but I think this circuit , shows a few more pieces.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
nine
It also is a device that limits the change in current flow.
But… the neutral is now “floating” because of the 1 ohm resistance.
At one ohm, the resistor has a maximum of 1 watt power.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
John Stamos reveals he broke news of Brian Wilson's death to Mike Love - ABC News
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Sarah Michelle Gellar Wants to 'Bring Back Everyone' in the New Buffy - Variety
[old diagram got deleted by accident]
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
For this case there are devices called Metal oxide varistors (MOV).
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
These are simplified answers to the original question, and does not change anything I wrote above.
a photo is worth a thousand words.
What species of fish are horse mackerels?
This is 'the assistant's answer'
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
2024–10–10[John johnson John Johnson ]
This is where this question deviates from being a 'generic' question, and becomes more specific.
so, what happens?
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
End of an era: Space Launch Complex 37 gets demolished - Spectrum News 13
Now when you have a certain ac resistance, then a current flows in a loop.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
But it can get overloaded, and no longer works.
CNN’s Live ‘Good Night, and Good Luck’ Telecast Spurs Special Coverage - Variety
Here is a simplified AC power diagram.
The other is “what does a “fuse” do?”
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Why am I not getting any atheists to debate with? Are they scared?
This one hit behind the barn.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Can the fuse protect the electronic devices from lightning instead of a surge protector.
How terrible are we at making future predictions of like technology?
(Dc diagram shown, AC is similar).
The MOV will conduct when the voltage exceeds 50% of line voltage.
A fuse is a non-resetable over current circuit protector.
Do you think that Airbnb is destroying neighborhoods throughout the US?
The third is lightning and “how it gets conducted into a home.”
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
This is where the MOV conducts again, and dissipated the energy.
At least they know the answer if they wanted it.
He then describes Rainy Season and Lightning.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
In schematic diagrams this is the symbol for a fuse:
The bolt then partially travels down the line to your home.
eight
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Barnstars:
What is lightning?
It seems Mohan does not understand the difference between a comment and an Answer.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Edit 2024–10.
One is “what exactly is in a ‘surge protector’ ? ”
2024–10–16 [ OO OLAOYE OYEBODE ]
What does a fuse do?
Upvotes:
what exactly is a ‘surge’ protector?
Because the load is inductive, the current lags the voltage.(by a bit).
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
[image of Common-mode choke]
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
One
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
An AC voltage/ current source, and an ac inductive load.
He then asserts :
There are three different concepts here that are getting confused.
First Sentence:
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
I post the exact comment here.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
He then describes the function of a fuse.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
the problem then depends on "how fast does the fuse operate?".
This device then solves the entire problem.
but this device (an Inductor) … impedes the rapid changes in the current.
A circuit breaker is similar, but is resettable.
These devices are installed between the “hot” and “neutral” and protective ground.
So, the voltage could go up to 500 volts, and the fuse will not open up.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
There are two important concepts here.